Kraken Vekta Aluminum Front Chassis Braces are here! Made right here in the USA from solid 6061 T6 Aluminum which has been fully machined with clean radius edges and smooth machined finish. You can polish these parts out to a mirror shine in just a few minutes with a bit of mothers polish. Brace is engraved on both sides with the FFRC logo. We've included the boss on the bottom of the brace which locks into the chassis for the ultimate support. If you're experiencing chassis flex then get one our braces and never worry about it again. This is a direct bolt on to the stock or the lightened chassis. Replace the plastic part and uses your exiting hardware.