Hardware packs are here.  After the many requests we've received over the years we finally decided to start offering the hardware that we use in our products direct to our customers. All our screws are rated 10.9 or 12.9 grade with protective black oxide coating.  We've started out adding our most common size screws below and will add to this as you request it.  If you don't see a size, ask for it.

Hardware is packaged in simple bags with no header card or decals included to help save costs.

Add a nice Flambeau plastic organizer box to your order (bottom of page) and make your own screw kit!

BODY CLIPS

(LG Clips suitable for use in 5th scale vehicles)

Tuff Tainer 3003 3-9 Compartments+
These are the same super tough Flambeau containers used in our screw kits.  The little boxes are perfect for organizing your small RC parts and hardware.  Made of super tough polypropylene, resists common chemicals, dual latch for extra reliability. Includes 9 dividers. 

Size: 9.125 x 5 x 1.25 inches (23.2 x 12.7 x 3.2 centimeters)

NOT RECOMMENDED FOR INTERNATIONAL CUSTOMERS!  ADDS EXTRA SHIPPING FEES!

Tuff Tainer 1002 2-6 Compartments
This is the mini version of these little boxes.  Originally we used these for our bearing kits.  They are perfect for small pinions, servo gears, bearings and a ton of other small items that you need to keep track of!

Size:4.625 x 3.375 x 1.25 inches (11.8 x 8.6 x 2.9 centimeters)

NOT RECOMMENDED FOR INTERNATIONAL CUSTOMERS!  ADDS EXTRA SHIPPING FEES!

HolmWreckers O-ring Lube:
This silicone lube is ideal for all rubber O-rings, it works excellent for shock rebuilds and carb rebuilds.
It lubricates and conditions rubber parts, stays where it's put and is safe to use in the -40º F to 400º F range.  It is a non curing silicone based sealant.

HolmWreckers Diff Grease:
 This Teflon based grease is the ideal friction reducer for smoother operation and faster action keeping your differential and transmission gears cooler. As a great all purpose lube in any radio controlled vehicle, this little .10 oz tub will go a long way as it takes only the smallest amount to create a protective film covering.

LOCTITE 222
Small 0.5 ml tube for Loctite brand 222 (small parts).  This convenient small tube will fit into most screw box containers and is a great item to have for that quick fix.  This is the same tube that we offer in most of our high quality screw kits! 

CARBON FIBER RODS & 7075 T6 INSERTS!

MAKE YOUR OWN TURNBUCKLES, PUSHRODS OR CHASSIS SUPPORTS!

With the release of our new carbon fiber toe link product line we knew that we would eventually get the flood of requests for custom lengths.  To avoid this, we are offering our customers a builder pack so you can customize your truck even if we don't offer the specific length that you need.  This can save you money too!  You get a full set of inserts and carbon as follows;

Total of 4 -Right hand thread M4 7075 T6 inserts

Total of 4 -Left hand thread M4 7075 T6 inserts

Total of 4 -6.0" long carbon fiber rod size to fit our inserts

SERVO CLAMPS

Another new little item that will save you a ton of headaches. Are you tired of breaking off your servo mounting tabs?  Use some of our aluminum servo clamps and never have to deal with that again.

Made from solid T6 6061 aluminum which has been polish tumbled then bright dip anodized for a superb finish. 

Available in Silver and Blue.  Please note that these will fit most 1/10th scale servos.  For larger 1/5th scale servo clamps check out our 5B servo clamps.

Each package contains 6 servo clamps and 12 3x12mm hex button screws for mounting.  (Enough for three servos) 

3mm THREADED INSERT KIT

Can be used in just about any application where you need a strong 3mm machine thread in a plastic part.
Comes complete with 8 inserts, 8 cap screws and drill bit. Enough to do a full T-MAXX transmission.  Just drill the stripped out holes, press in the inserts (they are very tight) and thread in the new screws.

You can also use these inserts just about anywhere else that you may need a 3mm thread.  We have even had feedback from customers using them in a-arms and shock towers.
We will be posting some pictures of an install on our help page.