KRAKEN

  • Kraken Vekta rear upper link mounts are here.  Fully machined profile with ultra tight tolerances!  Made right here in the USA.  Super duty link mount for the Kraken Vekta.  This mount support the two center links directly above the rear diff.

    KRAKEN VEKTA REAR ALUMINUM LINK MOUNT

    Kraken Vekta Aluminum Rear Upper Link mounts are here!  Bullet proof your suspension links with these hot parts.  Made right here in the USA from solid 6061 T6 Aluminum which has been fully machined with clean radius edges and smooth machined...

    $40.00
    Add to Cart
  • Kraken Vekta.5 Clear Front Windshield complete with mounting hardwared.  Made in the USA!  Our clear Vekta windshield can be painted.  Make sure to leave the plastic film on one side till you done painting, then remove it.  Exactly like painting a body.  If you want to leave the windshield clear, just remove the film from both sides. Kraken Vekta.5 Clear Front Windshield from us here at Fullforce!  Looks great on there and keeps out dirt and debris too!

    KRAKEN VEKTA WINDSHIELD

    Kraken Vekta.5 clear front windshield!  The Vekta is an awesome truck but the front end is wide open and allows a ton of debris to get in and around your chassis.  Our front windshield is a very simple little item that drastically reduces the...

    $14.00
    Add to Cart
  • Baja 5B 5T 5SC complete 2nd Generation fuel line kit.  Includes brass elbows, Tygon fuel line and hose clamps. Shown here mounted on an HPI Baja 5T truck.  You can see the clean routing of the fuel lines.

    BAJA 2nd GEN. HIGH FLOW FUEL LINE KIT

    HPI Baja high flow fuel line kit.  This is our new 2nd generation updated high flow fuel line kit for the HPI Baja 5B 5SCand other 5th scale trucks.  The new fully machined brass fittings and high quality Tygon fuel line allow for unrestricted...

    $20.00
    Add to Cart
  • You are purchasing one pair of 0.125" ID Brass fittings as used in our 5th scale high flow fuel line kits.  You can use your own fuel line and clamps for the install. Shown here mounted on an HPI Baja 5T truck.

    HIGH FLOW BRASS FUEL LINE FITTINGS (2)

    High flow brass fuel line fittings.  These are the same brass fittings available in our full fuel line kit.  Available for purchase for anyone wanting to use their own fuel line and clamps.  You get one pair of machined brass fittings...

    $12.00
    Add to Cart
  • Kraken Vekta.5 CLEAR POLY 3 PC rear panel set. Made in the USA!  Complete with mounting hardware. Completes the look of the rear body and these panels offer a great spot to show off some custom decals on the rear of your truck!

    KRAKEN VEKTA REAR PANELS 3PC

    Kraken Vekta.5 Rear Panels are here and shipping!  These panels are made from clear poly material.  They attach to the cage using simple plastic clamps.  The three piece design allows you to remove the center piece and use the Kraken tire...

    $20.00
    Add to Cart
  • V2 Vekta servo mounts now measure 1.8" tall and accommodate more servos! Fits the Kraken Vekta.5

    KRAKEN VEKTA V2 ALUMINUM STEERING SERVO MOUNTS

    V2 SERVO MOUNTS NOW SHIPPING!Our 2nd run of the servo mounts are taller to accommodate more servo options.  The new versions now measure 1.820" high and still come with the M4 servo clamps and hardware! Kraken Vekta Aluminum Servo mounts are now in...

    $45.00
  • Limited edition 7075 T6 Aluminum version of our Ultra shock tower for the Kraken Vekta!    This is the backside of our Vekta Aluminum Shock tower.  Fully machined with radius edges around the entire part!

    KRAKEN VEKTA 7075 ALUMINUM FRONT TOWER

    The Ultimate shock tower for the Kraken Vekta Made from solid T6 7075 Aluminum for incredible strength and durability.  Our design offers six shock mount position for fine tuning your suspension, is thicker than the stock tower and still comes in...

    $100.00
    Add to Cart
  • HPI Baja 5B 5T 5SC beadlock stainless wheel screws, pack of 100 3x10. 100 pcs of stainless 3x10mm screws ready to ship!

    M3 STAINLESS BEAD LOCK SCREWS

    Originally packed for the HPI Baja trucks these screws will also fit most other 5th scale bead lock wheels too including the Kraken Vekta, Losi 5ive-T and DBXL.   Full package of 100 3x12mm stainless steel socket head cap screws.  We know you...

    $8.50
    Add to Cart