Created with Sketch. Created with Sketch.

SLASH

  • TRAXXAS 2WD SLASH FULL BEARING KIT

    TRAXXAS 2WD SLASH FULL BEARING KIT

    Multi-purpose bearing kit was designed for the 2WD Traxxas Slash but fits a lot of other Traxxas vehicles too! All bearings in this kit are our super slick and extra smooth blue rubber sealed versions.  Kit can be used in all variations of the 2WD...

    Now: $21.00
    Add to Cart
  • TRAXXAS 4WD SLASH FULL BEARING KIT

    TRAXXAS 4WD SLASH FULL BEARING KIT

    Here is our full bearing kit for the new Traxxas Slash 4x4.   This has all the bearings including wheel, diff, and steering.  Do a full rebuild on your truck and get it back into that new condition!  All bearings in this kit are our super...

    Now: $21.00
    Add to Cart
  • 10th Scale Shock boots!  Available in a variety of colors to fit your paint scheme! Each pack contains 4 shock boots, enough to do most vehicles. 10th Scale Shock boots!  Available in a variety of colors to fit your paint scheme! Each pack contains 4 shock boots, enough to do most vehicles.

    10th SCALE SHOCK BOOTS 6" LONG

    THEY'RE BACK!   By popular demand we are bringing back our 10th scale shock boots!  We've made them longer to fit more vehicles too.  Want to protect those expensive shocks on your truck? Tired of rebuilding them so often? Well...

    Now: $10.00
    Choose Options
  • Set of 6 Aluminum Servo Clamps with hardware.  Silver versions.  For use with most 10th scale servos!  Set of 6 Aluminum Servo Clamps with hardware.  Blue versions.  For use with most 10th scale servos!

    10th SCALE SERVO CLAMPS

    Aluminum Servo clamps!  Another new little item that will save you a ton of headaches. Are you tired of breaking off your servo mounting tabs?  Use some of our aluminum servo clamps and never have to deal with that again. Our servo clamps are...

    Now: $12.00
    Choose Options
  • This is a replacement ski for use with our ski kits.  Comes with one ski, plastic block and mounting screws.

    REPLACEMENT SKI AND BLOCK

    Replacement ski for use with our custom ski kits.  This is an oem product includes one black ABS ski, black ABS ski block and screws.  This ski can be used on any of our current ski kits including the MAXX/REVO, Rustler/Stampede/Slash, HPI...

    Now: $10.00
    Add to Cart
  • SALE
    O-ring lube.  Great for lubricating seals on carbs, shocks and more!

    HOLMWRECKER O-RING SLICK

    This silicone lube is ideal for all rubber O-rings, it works excellent for shock rebuilds and carburetor rebuilds.  It lubricates and conditions rubber parts, stays where it's put and is safe to use in the -40º F to 400º F range.  It...

    Was: $4.00
    Now: $1.00
    Add to Cart
  • SALE
    Aluminum Universal Temp monitor bracket.  Can also be used as a transponder mount! Shown here mounted on one of our shop trucks with a temp monitor.

    ALUMINUM UNIVERSAL TEMP MONITOR BRACKET - SALE

    Our universal temp monitor bracket, originally designed to support most of the major brand onboard temp monitors (MIP and Traxxas). By allowing you to solidly mount the device to your vehicle in a neat and tidy manor. It can be used on any RC car or...

    Was: $12.00
    Now: $5.00
    Add to Cart
  • FULLFORCE RC LARGE DECAL SHEET

    These special decal sheets were specifically ordered for use with the large scale trucks but you can use them on anything including your toolbox!  Our standard decals simply were not big enough for this monster and we wanted something that would...

    Now: $0.50
    Add to Cart
  • Now available in 5 colors!

    FULLFORCE RC LASER ENGRAVED CARABINER

    Hot new FFRC apparel is here!  Locking carabiner laser engraved with our logo.  Pretty nice little item here to hold your keys or snap onto your carrying strap!  Measures approximately 3x2 inches. Chose your favorite color to match...

    Now: $5.00
    Choose Options
  • SALE
    Includes 8 inserts . 4 Left hand and 4 right hand thread only.  No Rods are included. Please note dimensions and tolerances on these inserts.  It is critical that you supply your own carbon rods and correctly size them.  ID of carbon rod needs to be 0.208-0.211" for a good fit.  Optimal OD of the carbon shaft should be 0.264" for a nice fit but it can be larger.

    M4 7075 T6 CUSTOM TURNBUCKLE / ROD END INSERT PACK

    Custom made metric thread M4 inserts to make your own turnbuckles or crawler links.  We have offered these to many customers on request in the past but we are now listing them as a retail item on our site.  These are our custom 7075 T6 aluminum...

    Was: $10.00
    Now: $6.00
    Add to Cart