DON'T FORGET TO CHECK OUR SPECIALS PAGE FOR

A COMBO DEAL ON ALL THESE ITEMS!

LIMITED EDITION 18th SCALE MICRO RC STAND

The Ultimate Truck display!  These Acrylic stands are designed to be wall mounted and support both your vehicle and your radio.   We've tested the fit on just about every 18th scale truck we have access to and the stands fit them all!  We use rigid 1/4" thick solid acrylic plastic material and laser cut the entire profile and engrave our logo right into the material!

Check out the pictures we've shot these with a variety of trucks to show just how versatile these stands are (Team Losi mini-T, Team Losi MLST, Duratrax Vendetta,  Venom mini giant (Trinity Clash), and Associated RC18).  The lower tray is designed to support both the stock and higher end radios (tested up to the largest size we could find, the M8).  Stands come packaged in three pieces, ready to assemble.  Each stand comes complete with assembly hardware and Allen key.  They are available in RED, GREEN, SMOKE, BLUE & CLEAR. 

Please note:  These are limited edition stands, we have a limited number of these available and we will not be making more.  Please do not ask for alternate colors as we will not be making them. 

NEW LOWER PRICE!  GET YOURS NOW!

Smoked is sold out! Clear is sold out!

Mini-T ALUMINUM FRONT AND REAR PIVOT BLOCK SET

Want to really beef up your mini-T?  Get these sweet 6061 aluminum hop ups right here.  You get the two most essential aluminum parts on the mini-t in one package price. Also fits Baja & Mini Slider.

Mini-T CARBON FIBER CHASSIS

An incredible chassis setup for the serious racers!  This chassis has the best of both worlds offering lightweight performance and the ability to configure the chassis for a variety of battery and electronic configurations.  It is built to accommodate standard micro size servos such as the HS 81MG & HS 85(using our  MN003 or MN003-55 servo mounts available separately).  The chassis also allows the use of custom built 6 cell 2/3A battery packs as well as standard micro packs.  All hardware for the upgrade is included as well as brackets and aluminum antenna mount.  With the same advantages as our original aluminum chassis (discontinued), this will surely satisfy the racer who has been a bit concerned about the weight.  Use our MN003 servo mounts to drop an upgraded servo onto this chassis too.  AVAILABLE IN SILVER CARBON FIBER ONLY!

Mini-T ALUMINUM UPPER CHASSIS BRACE

This little item was a suggestion from one of our customers.  The brace extends from the upper deck, over the servo, to the front bulkhead adding additional support for you guys running the hot new brushless systems.  Compatible with all versions of our mini-T chassis this brace is highly recommended for anyone bashing their mini-T.

TEMPORARILY OUT OF STOCK!

Mini-T ALUMINUM MICRO SERVO MOUNTS

For use with our race chassis above or can be modified to fit other chassis.  These servo mounts were designed for use with the HS81 & HS81MG servos but they will also accommodate most standard micro size servos with single ear tabs.  Hardware is included in each pack as well.

Mini-T ALUMINUM HS-55 SERVO MOUNTS

Due to the huge amount of requests that we received for this setup, we designed custom servo mounts for the Hitec HS-55 Feather servo.  These mounts will allow the use of this servo in any of our mini-T Chassis setups!

Mini-T ALUMINUM FRONT C-HUB SET

Get a pair of our universal c-hubs.  Don't worry about which side is which, they both fit!  Designed these for the best strength and the least amount of added weight.   They are extra sweet with radius chamfers all the way around the outside of the part.  Made from solid billet 6061 Aluminum they can take all kinds of abuse.  Start beefing up your truck with out bulletproof parts instead of spending your time replacing the stock ones!

Also fits Baja & Mini Slider.

Mini-T TITANIUM FRONT HINGE PIN BRACE

This little tiny part is incredibly light yet super strong.  Get the best performance out of your truck by adding these performance parts to your truck! Also fits Baja & Mini Slider.

Mini-T TITANIUM REAR HINGE PIN BRACE

This little tiny part is incredibly light yet super strong.  Get the best performance out of your truck by adding these performance parts to your truck! Also fits Baja & Mini Slider.

Mini-T FULL ALUMINUM A-ARM SET

Losi mini-T full aluminum a-arm sets are now in stock. Perfect fit with no modifications required.  Our mini-T a-arms are designed not only to look good but to also be extremely durable.  With additional shock placement positions our a-arms will give you more options for fine tuning your suspension too. Precision machined from solid billet T6 6061, with radius edges around all corners. You get both front and both rear A-arms in one package.  Total weight for all four arms is only 24 grams (0.8 oz).

Also fits Baja & Mini Slider.

Mini-T ALUMINUM FRONT SHOCK TOWER

Beautiful front shock tower for the mini-T. Lightweight and super strong it not only looks great but adds durability and performance to your truck. Has sweet radius edges all along front and can be polished very easily.(Uses your stock body mounts). Also fits Baja.

Mini-T TITANIUM BUMPER

Quit busting those plastic bumpers.  This is the ultimate bumper for the mini-T!  Solid titanium bumper with countersunk holes and radius around the entire part.  Also fits Baja & Mini Slider.

Mini-T ALUMINUM BIG BLOCK MOTOR MOUNT

Want to mount a bigger motor into your mini-T?  You're going to need one of these sweet T6 6061 black anodized motor mount plates!  For use with big block motors and brushless systems. Also fits Baja & Mini Slider.

Mini-T ALUMINUM REAR HUB CARRIERS

Losi mini-T aluminum Rear Hub Carriers are now in stock.  Universal design to eliminate the need for a left and right, these parts have a beautiful radius finish around edges with a tumble polish finish. Precision machined to eliminate any extra movement or play.  Each pack contains one pair of rear hub carriers. T6 6061 Aluminum. Also fits Baja & Mini Slider.

TEAM LOSI Mini-T FULL BEARING KIT           

Full replacement bearing kit for your mini-T series truck!  Has every single bearing on the truck including tranny and wheel bearings.  15 pieces (blue rubber sealed bearings).  Also fits Baja & Mini Slider.

Mini-T WHEEL BEARING KIT

Get rid of those stock plastic bushings that reduce your performance.  Install a full set of  our precision rubber sealed bearings on your truck and see how fast it can really go! Also fits Baja & Mini Slider.

Want more speed?  Pick up one of these Micro fireball motors from Venom right here.