
LOADING MENU
|
|
|
|||||||
|
|
|
|
||||||
![]()
|
CARBON FIBER RODS & 7075 T6 INSERTS! MAKE YOUR OWN TURNBUCKLES, PUSHRODS OR CHASSIS SUPPORTS!
With
the release of our new carbon fiber toe link product
line we knew that we would eventually get the flood of requests for
Total of 4 -Right hand thread M4 7075 T6 inserts Total of 4 -Left hand thread M4 7075 T6 inserts Total of 4 -6.0" long carbon fiber rod size to fit our inserts
|
|||||||
|
|
|
|||||||
|
|
|
|||||||
![]() |
VENOM ULTRA FUEL TUBING (3' packs) Venoms new ULTRA FUEL TUBING IN A CONVENIENT THREE(3) FOOT LENGTH! Standard (medium) Silicone fuel tubing is now available in a variety of colors. This is the standard fuel tubing used for most RC vehicles. Specs: Glow fuel use only, Inside diameter .25mm, Outside diameter 5mm. |
|||||||
|
|
|
|||||||
|
|
|
|
||||||
![]() ![]() |
SERVO CLAMPS Another new little item that will save you a ton of headaches. Are you tired of breaking off your servo mounting tabs? Use some of our aluminum servo clamps and never have to deal with that again. Made from solid T6 6061 aluminum which has been polish tumbled then bright dip anodized for a superb finish. Available in Silver and Blue. Please note that these will fit most 1/10th scale servos. For larger 1/5th scale servo clamps check out our 5B servo clamps. Each package contains 6 servo clamps and 12 3x12mm hex button screws for mounting. (Enough for three servos) |
|||||||
|
|
|
|
||||||
|
|
|
|||||||
![]() |
Tuff Tainer 3003 3-9 Compartments+ Size: 9.125 x 5 x 1.25 inches (23.2 x 12.7 x 3.2 centimeters) NOT RECOMMENDED FOR INTERNATIONAL CUSTOMERS! ADDS EXTRA SHIPPING FEES!
|
|||||||
![]() |
Tuff Tainer 1002 2-6 Compartments Size:4.625 x 3.375 x 1.25 inches (11.8 x 8.6 x 2.9 centimeters) NOT RECOMMENDED FOR INTERNATIONAL CUSTOMERS! ADDS EXTRA SHIPPING FEES!
|
|||||||
|
|
|
|||||||
|
|
|
|||||||
![]() |
HolmWreckers O-ring Lube:
|
|||||||
|
|
|
|||||||
|
|
|
|||||||
![]() |
HolmWreckers Diff Grease:
|
|||||||
|
|
|
|||||||
|
|
|
|||||||
![]() |
LOCTITE 222
|
|||||||
|
|
|
|||||||
|
|
|
|||||||
•
© 2003-2010 Copyright FULLFORCE RC