BAJA 5B WINTER SKI KITS ARE NOW HERE!!!

CHECK THEM OUT ON OUR SKI KITS PAGE!

BAJA 5B/5T FRONT SHOCK TOWER

Our brand new shock tower for the Baja 5B and 5T is one super rigid upgrade. We start out with a full billet chunk of 3/8" stock and mill both sides, all edges, tap the holes then put a super clean scotch brite brushed finish on the face.  Provides the stock as well as an additional shock mount position giving you more adjustability.  We've also made sure to design our bushings to recess right into the tower to prevent the stress on the shock screws!

BAJA 5B/5T ALUMINUM CAGE RISERS

These are our new aluminum cage risers.  They simply raise the height of your stock cage about 1/2" in the rear to allow clearance for aftermarket pipes.  No more melted cage or wing!  Includes one pair of risers and two cotter pins.  6061 T6 AL.

BAJA 5T FRONT BODY MOUNT BRACE

Check out our super thick and ultra strong aluminum front body mount brace!  This thing is incredibly thick (0.350"+) and made from solid 6061 T6 Aluminum.  This brace strengthens the front end, and adds some solid strength from the bumper to the shock tower.  Comes complete with M4x16 flat head screws for installation.

BAJA 5T ALUMINUM SIDE BODY POSTS

Check out these super sweet full length aluminum side body posts that are a direct fit for the 5T side rails.  Our posts are precision machined and sized for that perfect fit with absolutely no "slop".  Check out the incredible machined finish on these posts!  Four per pack 6061 T6 AL.

BAJA 5B "BUTTON" STYLE WING PINS

Add some real bling-bling to your truck with these super custom wing pins.  Sold in sets of two they are fully machined and direct fit to your stock wing.  Can easily be polished out for the extreme customized look!

(Updated pics now shows these pins with just a few minutes of DIY hand polishing!)

BAJA 5B "BALL" STYLE WING PINS

Add some real bling-bling to your truck with these super custom wing pins.  Sold in sets of two they are fully machined and direct fit to your stock wing.  Can easily be polished out for the extreme customized look!

(Updated pics now shows these pins with just a few minutes of DIY hand polishing!)

BAJA 5B "ROOK" STYLE WING PINS

Add some real bling-bling to your truck with these super custom wing pins.  Sold in sets of two they are fully machined and direct fit to your stock wing.  Can easily be polished out for the extreme customized look!

(Updated pics now shows these pins with just a few minutes of DIY hand polishing!)

BAJA 5B "SPIKE" STYLE WING PINS

Add some real bling-bling to your truck with these super custom wing pins.  Sold in sets of two they are fully machined and direct fit to your stock wing.  Can easily be polished out for the extreme customized look!

(Updated pics now shows these pins with just a few minutes of DIY hand polishing!)

BAJA 5B/5T 2nd GEN. HIGH FLOW FUEL LINE KIT

This is our new 2nd generation updated high flow fuel line kit for the Baja and other 5th scale trucks.  The new fully machined brass fittings and high quality Tygon fuel line allow for unrestricted fuel flow with this setup. Bring your engine back to life and get rid of those stock restrictive fuel lines! This kit not only allows better fuel flow and more power out of your engine but it also routes you fuel lines in a much cleaner and more professional manner.  Taking into consideration comments from our customers on our original kit we've addressed all the issues here. No more worries about the fit in the stock grommet, or having the sharp machined barbs cut your fingers during the install. These new fittings are perfectly sized to the supplied fuel line. The barbs are integrated into the fittings and they hold super tight in the rubber grommet.
Kit includes two assembled brass fittings, fuel line clips and two feet of Tygon fuel line. Can be used in the Baja 5B and 5T as well as a variety of other 5th scale vehicles.

This kit will increase your flow, prevent restriction and increase the horsepower of any engine!

2' LARGE TYGON FUEL LINE

By popular demand we are offering our high quality Tygon fuel line as a separate item.  Need a bit more for the fuel line kit or just want to route your lines a different way, this will do the job!

BAJA 5B/5T REAR SHOCK TOWER BRACE

This ultra heavy duty rear shock tower brace offers a whole lot more than just pretty looks.  Using the solid four point mounting design, we've take it a step further offering two fully usable shock mounting positions.  The upper holes give you the same tension as the stock locations while raising the shocks into a more vertical position offering much better geometry.  The second hole adds just over half an inch of preload on the shocks to give you extra support when landing those wicked jumps!

Made from 6061 Billet American material and supplied with complete black oxide 12.9 grade and stainless hardware.

BAJA 5B/5T SILVER CARBON ROCKER PANEL COVERS

Tired of digging the dirt out of your chassis?  Here is the answer!  Our Rocker Panels fit snugly inside your chassis and adhere with a tiny bit of silicone (not supplied).  They keep out all that dirt and debris and our American made Carbon Fiber material is extra tough! 

The Driver side panel has a "V" cut designed to be removed if you choose.  It allows for easy access to the stock location of the on/off switch.  If you have relocated your switch, then leave this tab in place.  Your choice!

These panels are currently offered in Silver only.

BAJA 5B/5T STAINLESS BEAD LOCK SCREWS

Full package of 100 3x10mm stainless steel socket head cap screws.  Never worry about rusted screws on your bead locks again!

BAJA 5B FRONT BODY  MOUNT POST

Here is another little item that will really make your truck stand out!  Take the body off and show off this really cool aluminum body post.  The surface finish is so clean that it looks polished already! 

5th SCALE SERVO CLAMP

If you've tried to upgrade your steering servo to either the Hitec HS-5745MG or the Multiplex Rhino Digi 4 servo, you may have noticed that there is a slight fit issue with the hole pattern.  Making it work requires that you remove some material from the servo tabs on your new servo.  This creates a whole other issue with constant broken tabs and replacing your servo case over and over again.  We've got the fix for you!  These heavy duty fully machined clamp fit over the entire surface of the tabs preventing any possible breakage.  Will fit both servos mentioned above, the stock HPI servo and others.  This will also work with servos on large scale air planes too!  Includes one pair of quality machined servo clamps and 4-M3x12 button head screws.  Can accommodate up to M4 screws (not provided)

BAJA 5B/5T SERVO CLAMP SET

With the number of requests that we received for this, we finally packaged it up!  Here it is, the full servo clamp set for the Baja trucks.  This pack includes one 5th scale pair of clamps for use with the Steering servo, and two pairs of our 10th scale clamps for use with the throttle/brake servo and if you have the upgrade for the relocated third servo.

BAJA 5B/5T CARBON DISK/AL PADS BRAKE KIT

Want to really lock up your rear brakes and put some stopping power into that beast?  This is the answer!  The carbon disk and metal pads have been proven to be one of the best combinations for stopping power.  This new setup includes our high quality carbon fiber brake disk (same material as our best selling MAXX/ Savage brake disks) and a pair of precision machined 6061 T6 Aluminum brake pads.

BAJA 5B ALUMINUM SIDE BODY POSTS

Add some style to your ride!  Our new side body posts are a direct fit onto your truck and will add some much needed bling to your truck!  Precision machined from solid 6061 T6 Aluminum, these posts have a super clean finish with a solid shine!

sold in pairs.

BAJA 5B/5T PIT BOX/SCREW KIT

After weeks of research and asking for input from customers, racers and bashers we are finally releasing our pit kit for the Baja trucks.   These kits are designed to save the day when you're at your local track and you break something or loose some hardware!  Consisting of a generous supply of the most commonly damaged/lost hardware along with bearings, e-clips and body clips this kit will be one of the most handy items to have in your toolbox!  (You can also pick up on of our handy polypropylene boxes for organizing this kit here)

Contents:

M6x14 FHCS 10 PCS

M5x16 FHCS 25 PCS

M5x20 FHCS 25 PCS

M5x12 BHSC 10 PCS (5B)

M5x30 BHSC 10 PCS (5T)

M4x16 SC 10 PCS

M4x25 SC 10 PCS

M4 Locknuts 10 PCS

M5 Locknuts 20 PCS

M4 e-clips 10 PCS

M7 e-clips 10 PCS

Body Clips LG 10 PCS

12x24x6mm Bearings 4 PCS
Total 164 Pieces!

BAJA 5B FULL 3 PIECE CLEAR WINDSHIELD SET

These are our new clear windshield sets for the Baja 5B & SS.  Our full windshield sets offer great protection at a super low price!  This set includes both side windshields, front vented windshield and installation hardware.  This is the no frills version and does not include our laser engraved logos that are available in the colored versions below.

Click here for installation pictures.

BAJA 5B FULL 3 PIECE COLORED WINDSHIELD SET

Our 3 piece windshield sets will not only add excellent protection from rocks and gravel but they also look killer!  Both side windows are engraved with our logo and laser cut for the perfect fit and they hinge upwards for quick access to the choke lever and carb.  The front windshield is also engraved and has vents cut in on the lower half for that perfect airflow right where its needed.  Keep the rocks out and still keep that necessary airflow going right where it's needed!

Each kit comes complete with all three pieces, plastic 3/8" cable clamps for attachment and 12.9 & stainless steel hardware.

We are currently offering these kits in Transparent Orange, Transparent Smoked and solid Blue an Solid Red (both a perfect match for the stock V 2.0 Baja bodies!)  The Orange color is very hard to see on the web, it is a real transparent orange and not quite the "yellow" that you may see on your monitor.

Click here for installation pictures.

BAJA 5B/5T SHOCK BOOTS

We are very pleased to offer our best selling shock boots now for these large scale trucks.  Our shock boots are designed to cover up your shocks and keep out unwanted dirt and debris.  Made from high quality lycra fabric which make our shock boots extremely durable.  Our special triple stitch method guarantees that our stitching will hold up and as an added bonus allows you to cut them to size without any problems!  We are offering these in complete sets of four (front and rear).  Very simple install, simply slide over your springs, tuck the ends in, and put your springs back on.  That's it!  Something so simple can save you a load of money by protecting your shocks!

BAJA 5B/5T FULL BEARING KIT           

This is our complete replacement bearing kit for your 5B.  Compatible with both the RTR and the SS version of the truck this kit replaces every single bearing needed for a full overhaul.  All bearings are double rubber sealed for superior performance and durability.  Ultra low maintenance on these bearings is another advantage.  Kit includes  26 pieces (blue and black rubber sealed bearings).

BAJA 5B/5T WHEEL BEARING KIT

If you're more into the quick fix, then this kit is for you.  Kit contains all eight (8) wheel bearings for the truck.  These are the most commonly worn out bearings and a couple of minutes of install time and you can get back to bashing!

FFRC LARGE DECAL SHEET

These special decal sheets were specifically ordered for use with the 5B!  Our standard decals simply were not big enough for this monster and we wanted something that would show better.  These sheets measure 5x3.5" and include a full 9 decals with variations of our logo.