HPI SAVAGE 7075 BRAKE HUB
SAVAGE 21, 25, SS, 4.6, KFX, LE & X*.

Want to replace that stock plastic hub with one that simply will not break? Get one our new 7075 Aluminum brake hubs. Our new brake hub is lengthened to accommodate a dual disk setup with the addition of stock or aftermarket carbon fiber brake disks.
Check out our Carbon fiber brake disk below (G001) for use with this hub as well.

*Not compatible with Savage X SS version as this truck uses the alternate HPI double brake disk setup.

Regular price: $12.00

CLEARANCE PRICE $6.00

CARBON FIBER BRAKE DISK

MAXX & SAVAGE TRUCKS RUNNING  0.75" BRAKE HUB

Our new brake disk is designed for superior performance versus the stock disk.  If you want to get the maximum stopping power without having to convert to a high dollar brake setup then this is what you've been looking for.  You can use this to create your own custom dual disk setup for the ultimate stopping power!

Fits all SAVAGE & 2.5 T-MAXX trucks using the 0.750" brake hub.  You must be running this size brake hub or this disk will not work!

This disk in combination with our SV007 Aluminum brake hub will be the perfect setup for some havy duty stopping power!

CARBON FIBER RODS & 7075 T6 INSERTS!

MAKE YOUR OWN TURNBUCKLES, PUSHRODS OR CHASSIS SUPPORTS!

With the release of our new carbon fiber toe link product line we knew that we would eventually get the flood of requests for custom lengths.  To avoid this, we are offering our customers a builder pack so you can customize your truck even if we don't offer the specific length that you need.  This can save you money too!  You get a full set of inserts and carbon as follows;

Total of 4 -Right hand thread M4 7075 T6 inserts

Total of 4 -Left hand thread M4 7075 T6 inserts

Total of 4 -6.0" long carbon fiber rod size to fit our inserts

GRAPHITE "HOLMWRECKER" REAR TOE LINKS

SAVAGE 21, 25, SS

Been bending those wimpy stock toe links on the rear of your truck?  Tired of replacing them and them snapping them off?  Time to upgrade to our new super beefy ones!

These graphite links will fit directly onto your truck with your existing hardware.  Preset at zero degrees toe in for the most stable position.

SV016

In stock

Compatibility Savage

Price: $20

 

SHOCK BOOTS

Our shock BOOTS will fit on almost any RC vehicle including stadium trucks and 1/8th scale buggies. 

LIMITED QUANTITIES, GET YOURS BEFORE THEY'RE GONE!

MORE PICS

SAVAGE TRIPLE RATE SPRINGS

SAVAGE 21, 25, SS, 4.6, KFX, LE, X & XL.

Triple rate Savage shock springs are designed specifically for this heavy truck.  Offering multiple rates of dampening they can absorb the small bumps and still handle the big jumps!  Available in six colors, they come in packs of eight (8).  Whether you're bashing your truck or trying to beat the competition at the track, you need the extra control that these springs will offer you.  Compatible with Integy MSR4 piggyback shocks and Hotbodies threaded body shocks as well!  Works on all Savage trucks including the SS, 25, and 21.

Dimensions:15.2mm ID, 118mm Long.

Specs: 1.4" 8 coils at 1.5 PPI, 1.8" 6 coils at 2.5 PPI, 1.36" 3 coils at 3 PPI. Total length 4.6".

10th SCALE SERVO CLAMPS

Another new little item that will save you a ton of headaches. Are you tired of breaking off your servo mounting tabs?  Use some of our aluminum servo clamps and never have to deal with that again.

Made from solid T6 6061 aluminum which has been polish tumbled then bright dip anodized for a superb finish. 

Available in Silver and Blue.  Please note that these will fit most 1/10th scale servos.  For larger 1/5th scale servo clamps check out our 5B servo clamps.

Each package contains 6 servo clamps and 12 3x12mm hex button screws for mounting.  (Enough for three servos) 

WE OFFER FULL BEARING KITS FOR THE HPI SAVAGE BOTH ELECTRIC AND NITRO!

HPI SAVAGE BEARING KITS

BE SURE TO CHECK OUT OUR SUPER HOT SKI KITS FOR THE HPI SAVAGE TRUCKS! 

WINTER SKI KITS ARE HERE!