
LOADING MENU
|
|
|
|||||||||
|
|
|
|
||||||||
|
Scroll down this page to find the Bearing kit for your truck. All of our bearing kits are full replacement kits, replacing all bearings on your truck. (does not include engine or clutch-bell bearings). We also offer a select number of kits for upgrading steering or wheel bearings. If you are looking for specific bearing sizes or would like to build your own kit, check out our new raw bearings page.
TRAXXAS BEARING KITS, TEAM ASSOCIATED BEARING KITS, TEAM LOSI BEARING KITS, HPI BEARING KITS, OTHER BEARING KITS
|
||||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
TRAXXAS SLASH FULL BEARING KIT Multi-purpose bearing kit was designed for the Traxxas Slash but fits a lot of other Traxxas vehicles too! (21 pcs - 17-5x11x4 and 4-5x8x2.5)
SLASH KIT FITS FOLLOWING ADDITIONAL VEHICLES:
|
|||||||||
|
|
|
|||||||||
|
|
||||||||||
|
|
|
|||||||||
|
Hot new bearing kit for your Traxxas Jato. Replace or upgrade all your bearings in one shot! Includes every single bearing on the truck! 23 pieces (blue rubber sealed bearings).
|
||||||||||
|
|
|
|||||||||
|
|
|
|
||||||||
![]() |
TRAXXAS REVO FULL BEARING KIT Full replacement bearing kit for the Revo. Includes every single bearing on the truck! 38 pieces (blue rubber sealed bearings).
|
|||||||||
|
|
|
|||||||||
|
|
|
|
||||||||
![]() |
This is a full replacement bearing kit for the 2.5 T-MAXX
and older, including the additional bearings for the steering and throttle bellcranks.
33 pieces (blue rubber sealed bearings).
(Please note that our kit does not include the single
10x19x5mm bearing for the E-MAXX)
|
|||||||||
|
TRAXXAS 3.3 T-MAXX
Specifically designed for
the new 3.3 T-MAXX, this kit offers the entire list of bearings for the
whole truck.
33 pieces (blue rubber sealed bearings).
|
||||||||||
|
STEERING AND THROTTLE BELLCRANK BEARING KIT FOR THE MAXX SERIES Don't need the whole kit? We got you covered! We are also offering a six pack of the 5x8x2.5 bearings needed to upgrade your stock steering and throttle bellcrank (blue rubber sealed bearings).
|
||||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
TRAXXAS NITRO RUSTLER BEARING KIT Full replacement bearing kit for the nitro Rustler. Boost your performance with this kit! 18 pieces (blue rubber sealed bearings).
|
|
||||||||
|
|
|
|||||||||
|
|
|
|
||||||||
![]() |
TRAXXAS NITRO STAMPEDE BEARING KIT Full replacement bearing kit for the nitro Stampede. This kit also fits the electric Stampede if using the new Traxxas 3736 steering blocks & 3752 rear carriers running the 5x11x4 bearings. Also fits the electric Spirit.16 pieces (blue rubber sealed bearings).
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
TRAXXAS NITRO 4-TEC BEARING KIT Full replacement bearing kit for the nitro 4-tec. Get rid of those sloppy bearings and upgrade to these! 23 pieces (blue rubber sealed bearings).
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
BAJA 5B FULL BEARING KIT
This is our complete replacement bearing kit for your 5B. Compatible with both the RTR and the SS version of the truck this kit replaces every single bearing needed for a full overhaul. All bearings are double rubber sealed for superior performance and durability. Ultra low maintenance on these bearings is another advantage. Kit includes 25 pieces (blue and black rubber sealed bearings).
|
|||||||||
![]() |
BAJA 5B WHEEL BEARING KIT If you're more into the quick fix, then this kit is for you. Kit contains all eight (8) wheel bearings for the truck. These are the most commonly worn out bearings and a couple of minutes of install time and you can get back to bashing!
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
Our precision rubber sealed bearing for the SAVAGE. You get the full replacement kit here to upgrade those stock bearings. 30 pieces (blue rubber sealed bearings).
|
|||||||||
![]() |
HPI SAVAGE STEERING BEARING KIT! Cheap alternative to our full bearing kit this kit . Contains four 6x10x3mm rubber sealed bearings for replacing the stock plastic bushings in your steering bellcrank for superior performance! (blue rubber sealed bearings)
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
This is our 15 piece rubber sealed bearing kit for the RC18. Replace all your old worn out bearings at once with this high quality kit. 15 pieces (blue rubber sealed bearings).
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
Complete bearing kit for the monster GT. This kit includes all bearings on the truck as well as the steering bellcrank bearings and bushings. 42 pieces (blue rubber sealed bearings).
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
Mini LST (MLST & MLST2) FULL BEARING KIT Full replacement bearing kit for the MLST. Contains all 23 bearings on the truck. Do a full overhaul on your truck with one of these kits! Fits all variation of the MLST including the MLST2 Raminator and more.
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
Full replacement bearing kit for your mini-T series truck! Has every single bearing on the truck including tranny and wheel bearings. 15 pieces (blue rubber sealed bearings). Also fits Baja & Mini Slider.
|
|||||||||
![]() |
TEAM LOSI Mini-T WHEEL BEARING KIT Get rid of those stock plastic bushings that reduce your performance. Install a full set of our precision rubber sealed bearings on your truck and see how fast it can really go! 8 pieces (blue rubber sealed bearings). Also fits Baja & Mini Slider.
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
This little package of 8 metal shielded bearings will make your micro-T really scream! Direct replacement bearings for all the wheel bushings.
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
TEAM LOSI LST FULL BEARING KIT Complete bearing kit for the LST monster! Replaces every single bearing on the truck including all tranny, diff and wheel bearings. Contains of all of our high quality precision rubber sealed bearings. 38 pieces (blue rubber sealed bearings). NOT COMPATIBLE WITH THE LST2!
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
TEAM LOSI LST2 FULL BEARING KIT Complete bearing kit for the LST2 truck is here too! Designed for the updated truck and has a different compliment of bearings for this beast. As you would expect this is the full kit. Contains of all of our high quality precision rubber sealed bearings. 38 pieces (blue rubber sealed bearings). NOT COMPATIBLE WITH THE ORIGINAL LST!
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
TAMIYA CLODBUSTER AND BULLHEAD BEARING KIT By popular demand we are now offering a full bearing kit for the Clodbuster/Bullhead. 24 pieces (blue rubber sealed bearings).
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
![]() |
Check out this full bearing kit for the awesome Kyosho mini inferno better known as the Half 8! 22 pieces (blue rubber sealed bearings).
|
|||||||||
|
|
|
|||||||||
|
|
|
|||||||||
•
© 2003-2008 Copyright FULLFORCE RC